FCR0.S06 VALVE SERIES
SAE06 Cartridge - 350 bar
Direct acting - Poppet Type
DESCRIPTION
A direct acting, screw-in, cartridge style, 1-way flow control valve with free reverse flow.
The valve acts as an adjustable flow regulator from port 2 to 1.
From port 1 to 2 the valve has a spring-biased check, closed until sufficient pressure is applied.
This allows the valve to have 2 settings : Adjustable flow regulator with reverse free flow (2vs1); Adjustable check valve (1vs2).
Cavity
HYDRAULIC SYMBOL
Cross section
SAE06
TECHNICAL DATA
EXTERNAL COMPONENT TREATMENT
Zn/Fe - standard (96h)
Zn/Ni (720h) (Upon customer request)
MAXIMUM FLOW
20 l/min
MAXIMUM OPERATING PRESSURE
350 bar
WEIGHT
0,058 kg
SEAL KIT CODE
SK.207 (standard sealing NBR-BUNA-N)
OIL TESTING CONDITIONS
ISO VG 46 cSt
TECH. SPEC. FOR CHARACTERIZATION
see page 807
ORIENTATION
No restrictions
INSTALLATION TORQUE
25-27 Nm
FILTRATION
20/18/15 ISO 4406 (maximum filtration admitted)
VISCOSITIES
7,4 to 420 cSt
FLUIDS
Mineral - based or synthetics with lubricating properties
OIL TEMPERATURE RANGE
-30° C to 110° C
O-RING TEMPERATURE RANGE
-30° C to 110° C (standard sealing NBR - BUNA - N)
-35° C to 140° C (HNBR - Upon customer request)
-23° C to 225° C (FKM - Upon customer request)
Hex.19
TIGHTENING TORQUE NUT
15-20 Nm Hex.17
0,75 cm
3
/ min @ 10 bar - (2vs1 - valve fully closed)
MAXIMUM INTERNAL LEAKAGE
0,75 cm
3
/ min @ 350 bar - (2vs1 - valve fully closed)
F C R 0
.
ORDERING CODE
S 0 6 0
*
. .
0
**
Valve basic code
Size
0 = Standard factory marking.
Customized marking can be
done upon request.
Marking
S06 = 9/16-18 UNF with Ø12
nose size
Flow adjustment
W = Top plastic knob + plastic counter knob
V = Top plastic knob
0 = Hex. allen head
00* = Standard
configuration.
10* = Fine regulation.
Bias Spring Options
Spring model
code
Cracking pressure
(bar)
Y 0,5
N 1
S 2,5
B 3
P 5
G 8
V 9
FLOW CONTROLS
Specifications may change without notice.
439 440
PERFORMANCE DETAILS
The p/Q performance illustraded in the chart are the same in both directions.
p/Q curve is recorded at TOil = 40°C and 46 cSt.
NOTE
